Butterfly Valve
Ductile Iron Butterfly Valve
Connection form: Wafer Working temperature: -14 degC<T<150 degC Working pressure: PN<1.6 Seal form: Auto sealed Material of seal surface: Soft sealed Structure: Center sealing Body material: Cast iron, ductile iron, stainless steel304/316, carbon steel Disc material:...
JIS Butterfly Valve
Specifications 1.DN50-1200(2"~48") 2.PN10/16(150/200PSI) 3.API, ANSI, ASME, DIN, BS,JIS, ISO approved 4.material:CI,DI,WCB,SS,ALB,brass,etc. Wafer Type Butterfly Valve with Handle, Worm gear, Pneumatic, Electric Driver Features: 1.Small in size and light in weight....
Stainless Steel Butterfly Valve Rubber Seat
Specification: Size: DN200-DN1000 Design as BS EN583 / API 609. Face-to-Face dimension conform to BS EN 558 / API 609. Flange drill is suitable for BS EN 1092-2 PN10/ PN16 /ANSI B16.5 Class 150. Test as ISO 5752 / API 609. Working pressure: 10 bar / 16 bar for PN10 / PN16....
Aluminium Bronze Butterfly Valve
Size; DN50-DN1200 End flange; ANSI B 16.1, EN 1092, AS 2129 Face to face; EN558-1 Top flange; ISO 5211 Normal pressure: PN1.0/1.6/2.5MPa (150/300PSI) Body:Aluminium Bronze Disc: Aluminium Bronze Stem: Stainless Steel, Aluminium Bronze, Monel Seat: EPDM/NBR Temprature...
Super Duplex Steel Butterfly Valve
Size DN50-DN1200 End flange ANSI B 16.1, EN 1092, AS 2129 Face to face EN558-1 Top flange ISO 5211 Normal pressure PN1.0/1.6/2.5MPa (150/300PSI) Body:Super Duplex Steel, 1.4529, 2507 Disc: Super Duplex Steel, 1.4529, 2507 Stem: Monel,Stainless Steel Seat: EPDM/NBR Temprature...
Rubber Seat Butterfly Valve
Size:DN50-DN1200 Face to Face:API609,BS5155,DIN3202,ISO5752 Top Flange:ISO 5211 Flanged End Dimension: DIN PN10/16/25, ANSI B16.5, BS4504, ISO PN10/16,BS 10 Table D, BS 10 Table E Normal Pressure:PN1.0/1.6Mpa(150/200PSI) Body:Cast Iron/Ductile Iron/WCB/ALB/CF8/CF8M...
Replaceable Seat Flange Butterfly Valve
Design characters: The rubber seat can be replaced. Correcting holes are made on flange according to standard, easy correcting during the installation. Through-out bolt or one-side bolt used. Easy replacing and maintenance. Shaft and disc connected by pin, torque screw or non...
PTFE Seat Butterfly Valve
General design: API 609 Mounting pad: ISO 5211 Face-to face: API 609 and EN558 1 to 20 series Flange drilling: DIN 250 and PN10 Body: Ductile iron and GGG40 Disc: Stainless steel, WCB and PTFE Shaft: Stainless steel, AISI316 Seat: PTFE+EPDM Actuating form: Worm gear drive and...
Fully PTFE Butterfly Valve
Nominal bore: DN50-DN300 (2 Inch-12 Inch) Valve Body: Cast Iron, Ductile Iron, Stainless Steel Valve Disc: Cast Iron+PTFE, Ductile Iron+PTFE Seat: PTFE Working Temperature: Normal Temperature (-40°C<T<120°C) Operation: Lever, Worm Gear, Actuator. Pressure: PN10, PN16,...
Pneumatic Control Butterfly Valve
Body: GG25, GGG40, Cast Iron, Ductile Iron, Stainless Steel. Disc: GG25, GGG40, Cast Iron, Ductile Iron, Stainless Steel. Stem: Stainless steel 420/410, F304, F316 Seat: EPDM Pneumatic Actuator: Double Action, Single Action. Type Available: Wafer. Sizes Available: 50-600 mm....
PVC Butterfly Valve
Material: PVC-U Standard: DIN ANSI JIS Standard Connection: Flange SIZE: DN50 ( 63mm ) 2" ~ DN300 ( 315mm ) 12" Working Pressure: 150PSI 1.0 MPa 100PSI 0.6MPa PVC Butterfly Valve ( Level & Gear ) FRPP Butterfly Valve ( Level & Gear ) PVC Non Actuator...
Double Eccentric Double Flange Butterfly Valve
Sizes: DN50mm to DN3000mm Pressure Range: PN (MPa): 1.0, 1.6, 2.0, 2.5 Body:DI/WCB/SS304/SS316 Disc:DI/SS304/SS316/C954 Stem:SS410/SS420/SS416/SS431 Body Seat:SS304/SS316 Seat:EPDM/NBR Suitable Mediums: Fresh water, sea water, gas, oils, acids, alkalis, etc Suitable...